I hate it when that happens. I broke the tenon off my favorite cheap car pipe. I bought some replacement stems from the going out of business sale at RNA Treasures and used the third one from the top to replace it, but I had to sand down the tenon until it fit. I did it by hand and I also ended up drilling the hole larger from the bit and funneling the airway with a file to get a better draw but it's working good now. I later learned that people chuck the stem up in a lathe or drill and make the sizing of the tenon faster.
Your stem will be harder to replace because it's a bent taper. Here's some ideas.
Some pipe repair guys find a metal tube that fits the ID of the stem and tenon to glue it back together. You could try this or try and find someone else to do this.
You could send this pipe out for repair. If you want to do this, I can look for some recommendations. There's still people around that will make you a replacement stem.
You could try and buy a stem to replace it, but matching the style will be tough and you may need to sand the tenon to fit.
You could buy a straight stem to fit and bend it yourself.
You could watch the RNA Treasures Instagram account. They've closed up their website but are selling off their inventory on Instagram now. You could try and find a donor pipe with a matching stem, they range from $10 - $50, they MAY sell some stems again in the future. https://www.instagram.com/rnatreasures/
I'd also be happy to send you one of the remaining stems I picked up if you want to try your hand at making it fit. Not sure I see a good match, though.
Join us on Zoom vHerf (Meeting # 2619860114 Password vHerf2020 )
@ShawnOL said:
Are tenons all the same diameter? That would be very convenient.
No. Of course not. What were you thinking?
WARNING: The above post may contain thoughts or ideas known to the State of Caliphornia to cause seething rage, confusion, distemper, nausea, perspiration, sphincter release, or cranial implosion to persons who implicitly trust only one news source, or find themselves at either the left or right political extreme. Proceed at your own risk.
"If you do not read the newspapers you're uninformed. If you do read the newspapers, you're misinformed." -- Mark Twain
Finished up some Eastfarthing in the HCA smooth tulip, followed by Haunted Bookshop in the Neerup Pickaxe.
WARNING: The above post may contain thoughts or ideas known to the State of Caliphornia to cause seething rage, confusion, distemper, nausea, perspiration, sphincter release, or cranial implosion to persons who implicitly trust only one news source, or find themselves at either the left or right political extreme. Proceed at your own risk.
"If you do not read the newspapers you're uninformed. If you do read the newspapers, you're misinformed." -- Mark Twain
Comments
Nope. It definitely would be convenient…but that would be too easy lol
So every maker uses their own diameter stem tenon? That sucks.
Trapped in the People's Communist Republic of Massachusetts.
I’d say quite a few of them are the same size. There are just a lot of variances in pipe designs that have different sizes.
I see. I'll look online for cheap replacements. If nothing I'll contact the maker.
Trapped in the People's Communist Republic of Massachusetts.
I hate it when that happens. I broke the tenon off my favorite cheap car pipe. I bought some replacement stems from the going out of business sale at RNA Treasures and used the third one from the top to replace it, but I had to sand down the tenon until it fit. I did it by hand and I also ended up drilling the hole larger from the bit and funneling the airway with a file to get a better draw but it's working good now. I later learned that people chuck the stem up in a lathe or drill and make the sizing of the tenon faster.
Your stem will be harder to replace because it's a bent taper. Here's some ideas.
Talbert pipes sells some stems in bulk, but I don't see a good match (bulldog seems the closest) and you probably only want one stem: https://talbertpipes.com/product-category/supplies/
Vermont Freehand sells stems, mostly straights:
https://vermontfreehand.com/mouthpieces/
You could watch the RNA Treasures Instagram account. They've closed up their website but are selling off their inventory on Instagram now. You could try and find a donor pipe with a matching stem, they range from $10 - $50, they MAY sell some stems again in the future. https://www.instagram.com/rnatreasures/
I'd also be happy to send you one of the remaining stems I picked up if you want to try your hand at making it fit. Not sure I see a good match, though.
No. Of course not. What were you thinking?
"If you do not read the newspapers you're uninformed. If you do read the newspapers, you're misinformed." -- Mark Twain
Thanks for the info, Stephen.
Trapped in the People's Communist Republic of Massachusetts.
2019 Sutliff English No. 1 Crumble Kake in my 2022 Morgan Bones PSD POY.
C&D dark Burley for shingles.

Trapped in the People's Communist Republic of Massachusetts.
Trapped in the People's Communist Republic of Massachusetts.
Local store blend. Happy Jack's Excellency Blend. Very heavy smoke production with hints of cinnamon
>
Granite State blend in a new cob
Dark Burley and Turkish this morning.

Trapped in the People's Communist Republic of Massachusetts.
Mix of Cyprian and C&D Red Virginia Flake, both jarred at lest 5 years, in a cob.
Don't let the wife know what you spend on guns, ammo or cigars.
Orlick Golden Sliced n a cob
White heather.

Trapped in the People's Communist Republic of Massachusetts.
Granite State in a cob
Finishing last night's bowl of heather.
Trapped in the People's Communist Republic of Massachusetts.
F&K Bat With a Hat.

Trapped in the People's Communist Republic of Massachusetts.
Finished up some Eastfarthing in the HCA smooth tulip, followed by Haunted Bookshop in the Neerup Pickaxe.
"If you do not read the newspapers you're uninformed. If you do read the newspapers, you're misinformed." -- Mark Twain
Good morning, fellas.
Trapped in the People's Communist Republic of Massachusetts.