Finally finishing up a Harley tank I've been working on.

0patience

So I spent some time in the shop today, finishing up the body work on a banged up tank I bought from a friend for a Harley Street Glide. I needed something to take my mind off the forum problems and all.
It's a marblized black and metalic blue paint job, so the marblizing is subtle.

It looks a little glossless right now, but tomorrow I have to put the Harley Davidson on the sides and pinstriping on the top.

Once the logo and pinstriping are done, then the clearcoats. I am thinking between the pinstriping and marblizing, I'll need to put at least 8 coats of clear on to make it even everything out.

So here are the first stages. More to come.

Vision

Thats really cool bro. A man of many tallents you be.

0patience

Most of the time was spent pulling the dents all out.
Once the dents were all out, then had to weld up the cracks from the stud welder.
Then the final body work was easy. LOL!
I used to have a dryer for tanks, but it went away a while ago when funds became a problem. LOL!
Now I may have to build a new one. It makes the drying time of the paint go from 14 hours to 2 hours.
Thankfully, I've gone to a water base airbrush paint that lets the pinstriping and logo paint dry in 1 minutes with a hair dryer. LOL!
So tomorrow, the pinstriping and logos will take about 2 hours to do, 15 minutes to dry and another 2 hours for the clear. Then wait til the next day for the clear to dry, wet sand and buff.

Wow! That's too much freakin work. LOL!

Big Tex

I wish you were closer man. I have a Fatboy with a couple dingers in the rear fender from my daughter riding her bike into the back of it. She never told me she did it. I got a little sick to my stomach when I saw the damage. I pulled the dent out and all it left was a little crack in the clear coat. I did forgive her, somehow, lol. The worst part was that she did it a second time while I was in the garage with her. That time it chipped out a piece of the paint. Oh well, kids will be kids. I'll probably never get it fixed since everytime I look at it I chuckle because it reminds me of her learning to ride a bike. But if you were closer, I'd let you at least give me an estimate! You do good work brother!

rzaman

Very cool Tony...I wish I had your skills. Congrats!!!

0patience:

So I spent some time in the shop today, finishing up the body work on a banged up tank I bought from a friend for a Harley Street Glide. I needed something to take my mind off the forum problems and all.
It's a marblized black and metalic blue paint job, so the marblizing is subtle.

It looks a little glossless right now, but tomorrow I have to put the Harley Davidson on the sides and pinstriping on the top.

Once the logo and pinstriping are done, then the clearcoats. I am thinking between the pinstriping and marblizing, I'll need to put at least 8 coats of clear on to make it even everything out.

So here are the first stages. More to come.

0patience

Big Tex:

I wish you were closer man. I have a Fatboy with a couple dingers in the rear fender from my daughter riding her bike into the back of it. She never told me she did it. I got a little sick to my stomach when I saw the damage. I pulled the dent out and all it left was a little crack in the clear coat. I did forgive her, somehow, lol. The worst part was that she did it a second time while I was in the garage with her. That time it chipped out a piece of the paint. Oh well, kids will be kids. I'll probably never get it fixed since everytime I look at it I chuckle because it reminds me of her learning to ride a bike. But if you were closer, I'd let you at least give me an estimate! You do good work brother!

I'll have the pinstriping and clear done tomorrow.
But the wetsanding and buffing may not be done until Tuesday night.
I'll have pics of the pinstriping and logo and clear tomorrow, but it won't be wetsanded or buffed out.
Once the clear is buffed out, then the finished product will be done.
Then it goes on ebay or craigslist. LOL!

Is it just sand, paint and clear?
If it is just one color and clear, cost of the sealer, paint and clear and a couple hours.
But it all depends on the paint you want. What color is the bike now?
The other problem is matching the paint. It's easier to do the front fender, tank and rear fender as a set.
Once this tank is done, we can talk about options.

0patience

rzaman:

Very cool Tony...I wish I had your skills. Congrats!!!

Thanks Rip, I appreciate it.

reggie713

cool, cant wait to see it done

0patience

Here is the tank with the graphics, logo and clearcoat.
Now it has to dry and then be buffed out.
I was gonna do pinstriping, but the graphic on the top of the tank looked better, so I went with that.

MTuccelli

0patience:

Here is the tank with the graphics, logo and clearcoat.
Now it has to dry and then be buffed out.
I was gonna do pinstriping, but the graphic on the top of the tank looked better, so I went with that.

Nice very nice )

reggie713

i bet it will be killer in the sun light!! looks awesome

0patience

The wet sanding and buffing is the part I always hate.
But it is great to see the finish product.
I always like the paint part of it, cause I get to see it transform into something nice.

reggie713

0patience:

The wet sanding and buffing is the part I always hate.
But it is great to see the finish product.
I always like the paint part of it, cause I get to see it transform into something nice.

yeah, thats why i like to restore old cars, i love the looks my wife gives me, and the what the hell are you gonna do with thats! shes learned to leave me alone tho! finally!

Rain

Tony, you are an artist.

Amos_Umwhat

Looks nice! I painted my old Super-Glide (FXR) a couple times. Biggest pain I ever had was a full skirt front fender I put on it, I couldn't figure out how to leech the preservative out from under the rivets. Finally settled on repeatedly priming just the rivets, allow to dry, remove...over and over. Looked good when it was done. Very satisfying work, isn't it? Looks like you've got talent.

kaspera79

That's some nice work there Tony.

mmccartneydc

Beautiful Tony! Nice job!

0patience

Thanks guys. I appreciate the kind words.