Seems like mine is that verdammt 11/32”. They make a 3/8” 10-32 nut...everyone has a 3/8 socket or wrench..... why on God’s green earth would anyone ever use an 11/32” 10-32 nut? Are you listening Learjet? Cessna?
I'm still troubled by what I did for that Klondike bar...
@Trykflyr_1 said:
Seems like mine is that verdammt 11/32”. They make a 3/8” 10-32 nut...everyone has a 3/8 socket or wrench..... why on God’s green earth would anyone ever use an 11/32” 10-32 nut? Are you listening Learjet? Cessna?
I don't know why. But, I do know that I've had to make a special trip to the auto-parts store to buy the socket, and an open-end wrench in that size. As for the 7/16 and 9/16 and 10mm, I've got several of each. Not only do they evaporate when I'm not looking, they'll jump off the damn ratchet and roll to the farthest recesses of the shop at just the moment they're needed. Kind of like wanting your 13 year old to mow the yard. Where'd he go? He was here a minute ago.
WARNING: The above post may contain thoughts or ideas known to the State of Caliphornia to cause seething rage, confusion, distemper, nausea, perspiration, sphincter release, or cranial implosion to persons who implicitly trust only one news source, or find themselves at either the left or right political extreme. Proceed at your own risk.
"If you do not read the newspapers you're uninformed. If you do read the newspapers, you're misinformed." -- Mark Twain
@Trykflyr_1 said:
Seems like mine is that verdammt 11/32”. They make a 3/8” 10-32 nut...everyone has a 3/8 socket or wrench..... why on God’s green earth would anyone ever use an 11/32” 10-32 nut? Are you listening Learjet? Cessna?
They use 11/32" nuts a lot on auto electrical connections/switches.....Don't know why.
@Trykflyr_1 said:
Seems like mine is that verdammt 11/32”. They make a 3/8” 10-32 nut...everyone has a 3/8 socket or wrench..... why on God’s green earth would anyone ever use an 11/32” 10-32 nut? Are you listening Learjet? Cessna?
Peterbuilt, Kenworth and every automotive electrical supplier must get a bulk deal on those nuts. Grab a 3/8" socket or nut driver and sure as hell, it's 11/32".
And whether or not it is 3/8" depends on how far the machine is from my truck.
The further away, the more likely I grabbed the wrong one.
In Fumo Pax Money can't buy happiness, but it can buy cigars and that's close enough.
Clink, Clink...........nothing.........MotherF******!!
Clink, clink, clink, rattling noise..............I heard it hit the ground, where the hell did it go??
Clink, clink, clink...............Whew! That could have ended worse.
In Fumo Pax Money can't buy happiness, but it can buy cigars and that's close enough.
@0patience said:
Clink, Clink...........nothing.........MotherF******!!
Clink, clink, clink, rattling noise..............I heard it hit the ground, where the hell did it go??
Clink, clink, clink...............Whew! That could have ended worse.
I always put a 5 gal bucket of used/burnt gear oil under what ever I work on....It works like a magnet.
Comments
David screen captured that from his own social media....
FIFY Franky..
If you want to bomb me send it to Tony @0patience
If you are a newbie I got Dem nachos....
Saw this online yesterday and thought the same thing.
Ouch
All that came to my mind is “we know a thing or two, because we’ve seen a thing or two.”
MOW badge received.
A rolling stone gathers no moss......Houses and vineyards....Yes
Mine got more lols
You have more friends 😂
And **** I thought it was funny too!
Can’t be a B!7ch around these parts. Otherwise you go out like @Scotch_n_Smoke
😂😂😂😂🤔
If you want to bomb me send it to Tony @0patience
If you are a newbie I got Dem nachos....
Did I miss something?
What happened?
Money can't buy happiness, but it can buy cigars and that's close enough.
Lol just some good natured humor. You know forum shenanigans!
If you want to bomb me send it to Tony @0patience
If you are a newbie I got Dem nachos....
Looks even to me.......
Hey Biden, quit trying to stuff the ballot box after the election!
His handlers forgot to tell him it was over
9/16"
Money can't buy happiness, but it can buy cigars and that's close enough.
They weren't lost. They were stolen by your coworkers.
Trapped in the People's Communits Republic of Massachusetts.
Seems like mine is that verdammt 11/32”. They make a 3/8” 10-32 nut...everyone has a 3/8 socket or wrench..... why on God’s green earth would anyone ever use an 11/32” 10-32 nut? Are you listening Learjet? Cessna?
I don't know why. But, I do know that I've had to make a special trip to the auto-parts store to buy the socket, and an open-end wrench in that size. As for the 7/16 and 9/16 and 10mm, I've got several of each. Not only do they evaporate when I'm not looking, they'll jump off the damn ratchet and roll to the farthest recesses of the shop at just the moment they're needed. Kind of like wanting your 13 year old to mow the yard. Where'd he go? He was here a minute ago.
"If you do not read the newspapers you're uninformed. If you do read the newspapers, you're misinformed." -- Mark Twain
My cars swallow 10 mm sockets, they never find the floor.
They use 11/32" nuts a lot on auto electrical connections/switches.....Don't know why.
Peterbuilt, Kenworth and every automotive electrical supplier must get a bulk deal on those nuts. Grab a 3/8" socket or nut driver and sure as hell, it's 11/32".
And whether or not it is 3/8" depends on how far the machine is from my truck.
The further away, the more likely I grabbed the wrong one.
Money can't buy happiness, but it can buy cigars and that's close enough.
Clink, Clink...........nothing.........MotherF******!!
Clink, clink, clink, rattling noise..............I heard it hit the ground, where the hell did it go??
Clink, clink, clink...............Whew! That could have ended worse.
Money can't buy happiness, but it can buy cigars and that's close enough.
I always put a 5 gal bucket of used/burnt gear oil under what ever I work on....It works like a magnet.