@Olekingcole said:
Ended the workout with a 2,000 meter row
Looks like you're getting faster. What resistance?
If Chris says anything less than 10 I’m going to have to reevaluate our relationship 🤔😬😂
That's funny, he just told me it was 10. The requirement is 2k yds in 9:40(?) on resistance of 5 and up. It seems like the lower resistance would actually make the goal more difficult. I had it on 8.5 and my time was 8:45. The other two guys I work with, one did it in 8:10 on 10 and the other 9:30 on 7.
Installed the new coils in the kiln door, the usual complications and problems, now too tired to test it and replace the door gasket but tomorrow is another day.
@silvermouse said:
Cutting animal shapes out of a 4x8 sheet of 1/2" plywood with a 60 year old Craftsman scroll saw. Back when Sears Craftsman tools had a reputation for quality..
Yes! I love mine!
"We make a living by what we get, but we make a life by what we give". Winston Churchill. MOW badge received.
@silvermouse said:
Cutting animal shapes out of a 4x8 sheet of 1/2" plywood with a 60 year old Craftsman scroll saw. Back when Sears Craftsman tools had a reputation for quality..
Yes! I love mine!
About maintenance, with extended use the gear box gets pretty hot, should I take it apart and do something to the mechanism to help it run cooler?
I'd imagine there's a chest freezer in your basement at home with a lifetime supply of ice cream, so you don't have to go to the supermarket and buy some substandard ice cream.
When I think of Buck's ice cream, I remember how you sent two 5gal. tubs to MKE for one of the earlier herfs. We all ate the sh*t out of it, and I was eating ice cream for weeks on the leftovers. It was awesome.
@peter4jc said:
I'd imagine there's a chest freezer in your basement at home with a lifetime supply of ice cream, so you don't have to go to the supermarket and buy some substandard ice cream.
When I think of Buck's ice cream, I remember how you sent two 5gal. tubs to MKE for one of the earlier herfs. We all ate the sh*t out of it, and I was eating ice cream for weeks on the leftovers. It was awesome.
@silvermouse said:
Cutting animal shapes out of a 4x8 sheet of 1/2" plywood with a 60 year old Craftsman scroll saw. Back when Sears Craftsman tools had a reputation for quality..
Yes! I love mine!
About maintenance, with extended use the gear box gets pretty hot, should I take it apart and do something to the mechanism to help it run cooler?
Is it clean? Might try blowing out any dust first.
"We make a living by what we get, but we make a life by what we give". Winston Churchill. MOW badge received.
Comments
That's funny, he just told me it was 10. The requirement is 2k yds in 9:40(?) on resistance of 5 and up. It seems like the lower resistance would actually make the goal more difficult. I had it on 8.5 and my time was 8:45. The other two guys I work with, one did it in 8:10 on 10 and the other 9:30 on 7.
Nolite Oblivisci Peniculus Dentes
Fuel problem sorted. Thermostat housing leaking. Housing is warped. Stay tuned.
Nolite Oblivisci Peniculus Dentes
Installed the new coils in the kiln door, the usual complications and problems, now too tired to test it and replace the door gasket but tomorrow is another day.
Yes! I love mine!
MOW badge received.
About maintenance, with extended use the gear box gets pretty hot, should I take it apart and do something to the mechanism to help it run cooler?
My last official day of work! Now it’s just cleaning up and selling off the equipment!
I'd imagine there's a chest freezer in your basement at home with a lifetime supply of ice cream, so you don't have to go to the supermarket and buy some substandard ice cream.
When I think of Buck's ice cream, I remember how you sent two 5gal. tubs to MKE for one of the earlier herfs. We all ate the sh*t out of it, and I was eating ice cream for weeks on the leftovers. It was awesome.
Thanks Peter, I enjoyed sending it!
Is it clean? Might try blowing out any dust first.
MOW badge received.
Glad your'e retiring Charlie. You think you were busy before you better put your seat belt on now.
Told her id wash it so she let me take the car. Win win for me
May you have a long A## retirement and it gets better everyday
Yay golf day
My son’s engine decided to play a knock knock joke.
Here’s what it should look like.
How it looks now!
Nothin a little duct tape and JB weld won’t fix
Took the family out for boat outing.
Did the boat sink???
Trying to recover all his pew pews 😂 from the boating accident.
A good cigar and whiskey solve most problems.