Work Room

arch72
arch72 Posts: 772 ✭✭✭✭
in Non Cigar Related
I finally got my work room done now I can get on to the fun stuff of carving Thought I would let you all see it let me know what you think

https://www.youtube.com/watch?v=OZ3k7CHScKA&t=8s
Tagged:

Comments

  • Bob_Luken
    Bob_Luken Posts: 11,725 ✭✭✭✭✭
    Pretty cool!
  • dirtdude
    dirtdude Posts: 6,263 ✭✭✭✭✭
    You been busy Archie
    A little dirt never hurt
  • arch72
    arch72 Posts: 772 ✭✭✭✭
    Now I am working on a bit holder for the burrs and now all I need to get is 3 more tools I want a small drill press, bench top sander with belt and disk and a scroll saw it seems like it is always a work in progress lol
  • 0patience
    0patience Posts: 10,665 ✭✭✭✭✭
    Pretty cool. What are you carving?
    In Fumo Pax
    Money can't buy happiness, but it can buy cigars and that's close enough.

    Wylaff said:
    Atmospheric pressure and crap.
  • arch72
    arch72 Posts: 772 ✭✭✭✭
    well I haven't started a carving jet but I want to carve the Eggs that you see in the video I am going to do some Celtic knots on it and then I have a couple of pictures I want to do a relief carving of
  • silvermouse
    silvermouse Posts: 23,639 ✭✭✭✭✭
    arch72 said:
    Now I am working on a bit holder for the burrs and now all I need to get is 3 more tools I want a small drill press, bench top sander with belt and disk and a scroll saw it seems like it is always a work in progress lol
    Good work space, Arch. Regarding a small drill press, Harbor Freight has a fairly large benchtop one for usually around $60. If you are planning on only doing small work Foredom makes one that you attach your flexshaft to but it only has a throw of a few inches and is somewhat expensive for what it is. Rio Grande sells a Proxxon mini drill press too, I have had good luck with that brand. Dremel makes a decent variable speed scroll saw, for about $160 at Home Depot. 
  • First_Warrior
    First_Warrior Posts: 3,661 ✭✭✭✭✭
    @arch72 you got a good set up. I have a suggestion for a tool for you. A small bench top lathe in addition to the tools on your wish list. I have made a living for 35 years on a lathe turning deco and functional pieces. Once you learn how to use a lathe you will never be without one. Regardless I think you look at tools the way I do. Tools are toys.
  • Diver43
    Diver43 Posts: 2,218 ✭✭✭✭✭
    @arch72 Looks like a nice workshop Archie. You should be able to keep yourself busy for a while.
    Logistics cannot win a war, but its absence or inadequacy can cause defeat. FM100-5
  • CharlieHeis
    CharlieHeis Posts: 8,984 ✭✭✭✭✭
    Looks good, Archie.
  • peter4jc
    peter4jc Posts: 18,180 ✭✭✭✭✭
    Very cool Archie.  But I didn't see an ashtray in there.  ?
    "I could've had a Mi Querida!"   Nick Bardis
  • Albinfk
    Albinfk Posts: 1,923 ✭✭✭✭✭
    Very nice Archie. How long did it take you to get your room cleaned up before you took that video?
  • WaterNerd
    WaterNerd Posts: 3,376 ✭✭✭✭✭
    Very Nice Archie :)
    Better to remain silent and be thought a fool than to speak out and remove all doubt
    — Abraham Lincoln


  • genareddog
    genareddog Posts: 4,465 ✭✭✭✭✭
    Looks good
  • Amos_Umwhat
    Amos_Umwhat Posts: 9,895 ✭✭✭✭✭
    Very nice.
    "If you do not read the newspapers you're uninformed.  If you do read the newspapers, you're misinformed." --  Mark Twain
  • arch72
    arch72 Posts: 772 ✭✭✭✭
    edited March 2017
    Albinfk said:
    Very nice Archie. How long did it take you to get your room cleaned up before you took that video?
    About a week and a half but mostly waiting on the table to come in the mail and @First_Warrior I have been looking at a lathe but not sure which one would be best any suggestions?  

  • arch72
    arch72 Posts: 772 ✭✭✭✭
    edited March 2017
    Ok so here are links to the tools I am looking at ant info you have please let me know good and bad

    Sander

    Drill Press

    Scroll Saw

    Printer
     here is a lathe I was looking at any good? 
  • First_Warrior
    First_Warrior Posts: 3,661 ✭✭✭✭✭
    The lathe you are considering is pretty good for the price. Electronic Variable Speed control is what you want as switching pulleys is a thing of the past. Have fun!! 

Categories