Home› General Discussion
Options

Homemade Stubber Question

84CJ784CJ7 Posts: 372 ✭✭✭✭
in General Discussion
I made a couple of these last week after seeing the ones @Stubble has made.  I rounded the ends so I could carry it in my pocket without getting wounded.  

I hope I'm not stepping on anyone's toes by doing this, I just hate begging for things....especially when I havent paid my dues here.

I tried it out on a lancero thinking it would be the extreme test.  It worked well, any suggestions on a better test before I make more for friends?





Thanks,

Mark
«1

Comments

  • Options
    WaterNerdWaterNerd Posts: 3,296 ✭✭✭✭✭
    Great job on the stubber Mark @84CJ7 I have one that was given to me by a forum member and I use it every time I enjoy a cigar. Not sure how else to test it. Guess you could try it on a big ring cigar to see if it holds the cigar
    Better to remain silent and be thought a fool than to speak out and remove all doubt
    — Abraham Lincoln


  • Options
    Sketch6995Sketch6995 Posts: 4,495 ✭✭✭✭✭
    @84CJ7

    That's cool as hell......and don't worry about stepping on toes, when being creative, just remember to make and extra one and send it my way lol
    They always did say plagiarism is the soul of artistry.
    The higher.......the fewer.  ( Alexander Rozhenko)

     What you can't forgive......you will become.
  • Options
    84CJ784CJ7 Posts: 372 ✭✭✭✭
    Thanks for the encouragement.  I was afraid it wouldn't pierce the wrapper and just tear it up.  Figured the smaller gauges would be the worst.  

    My next test will be a 54+ ring.

    Mark
  • Options
    peter4jcpeter4jc Posts: 15,406 ✭✭✭✭✭
    Mark,

    How did you anchor the posts, or are they tight enough to get crammed in and stay in place?

    I use a cork from a wine bottle to protect the tips...  I think you'd like it more with a point on the tines.  But if it works for you, that's great!
    "I could've had a Mi Querida!"   Nick Bardis
  • Options
    84CJ784CJ7 Posts: 372 ✭✭✭✭
    @peter4jc It worked really well on the lancero, only left the 2 tiny holes with no tearing. Then again, I haven't used it but the one time.  Best part is no self inflicted wounds while in my pocket.

    I used a 1/16th inch drill bit for the holes and 3/16th stainless steel TIG rod.  Basically they are "pressed fit" into the antler.

    @Njbow great idea, looks really good.

    Mark
  • Options
    arch72arch72 Posts: 772 ✭✭✭✭
    I made this one and I put a cork on the prongs so I don't get stabbed

     
  • Options
    NjbowNjbow Posts: 62 ✭✭✭
    @arch72 that is great looking I love skulls very unique
  • Options
    84CJ784CJ7 Posts: 372 ✭✭✭✭
    @peter4jc, sorry....the TIG rod is 1/8th inch diameter not 3/16th
  • Options
    Diver43Diver43 Posts: 2,137 ✭✭✭✭✭
    YankeeMan said:
    You guys are putting me to shame.  I use a corn cob holder.  It's not pretty, but it works.

    P.S.: I don't use it in public, I do have a little pride!

    Was at the dollar store with the wife over the weekend. Saw a pack of those and had the same thought. Maybe paint them or something?
    Logistics cannot win a war, but its absence or inadequacy can cause defeat. FM100-5
  • Options
    84CJ784CJ7 Posts: 372 ✭✭✭✭
    I did it cause I'm cheap...your corn cob holder cost more than this.

    Too bad I have limited supplies
  • Options
    NjbowNjbow Posts: 62 ✭✭✭
    edited January 2017
     you a pm
  • Options
    WylaffWylaff Posts: 5,271 ✭✭✭✭✭
    It's cool. You can believe him now.
    "Cooking isn't about struggling; It's about pleasure. It's like sǝx, with a wider variety of sauces."

    At any given time the urge to sing "In The Jungle" is just a whim away... A whim away... A whim away...
  • Options
    jlmartajlmarta Posts: 7,881 ✭✭✭✭✭
    Oh, I do, I do.....   :p
  • Options
    YankeeManYankeeMan Posts: 2,654 ✭✭✭✭✭
    variant2 said:
    I don't like carrying extra stuff with me so I had the pins surgically appended to my thumb. 

    Behold my thumbler!


    Now that $hit is funny!
  • Options
    CharlieHeisCharlieHeis Posts: 8,167 ✭✭✭✭✭
    YankeeMan said:
    variant2 said:
    I don't like carrying extra stuff with me so I had the pins surgically appended to my thumb. 

    Behold my thumbler!


    Now that $hit is funny!
    Until it's time to use the restroom.
  • Options
    arch72arch72 Posts: 772 ✭✭✭✭
    are they retractable? @variant2  lol 
  • Options
    RolanddeschainRolanddeschain Posts: 898 ✭✭✭✭✭
    I think he beat you to it.....
    Long days and pleasant nights,

    Roland
  • Options
    variant2variant2 Posts: 882 ✭✭✭✭
    arch72 said:
    are they retractable? @variant2  lol 
    Not yet.

    Rolanddeschain said:
    I think he beat you to it.....
    Don't be silly... that's just a cartoon.

    Cнeerѕ! Moтнerғυcĸer
  • Options
    Sketch6995Sketch6995 Posts: 4,495 ✭✭✭✭✭
    Well
    I guess you better learn to rebuild a destroyed mailbox.

    9505511453517024124442
    The higher.......the fewer.  ( Alexander Rozhenko)

     What you can't forgive......you will become.
  • Options
    84CJ784CJ7 Posts: 372 ✭✭✭✭
    Oh chit!
  • Options
    TNBigfoot68TNBigfoot68 Posts: 2,742 ✭✭✭✭✭
    The Nubber looks great, you can get cork at places Hobby Lobby to put over the ends.  I love mine. I use the one @peter4jc sent me, around Christmas I had these made for gifts. The cork was cheap to purchase. 
    I was born a fool, and just got bigger!
  • Options
    84CJ784CJ7 Posts: 372 ✭✭✭✭
    That's a really nice set, he does great work.

    I think I want to try the thumb nubber that @YankeeMan invented.

  • Options
    NjbowNjbow Posts: 62 ✭✭✭
    Those are nice looking  @TNBigfoot68
  • Options
    YaksterYakster Posts: 25,712 ✭✭✭✭✭
    Cork?  You mean that thing on top of my bourbon bottles?  Yeah, they work good. 
    Join us on Zoom vHerf (Meeting # 2619860114 Password vHerf2020 )
  • Options
    84CJ784CJ7 Posts: 372 ✭✭✭✭
    Now THAT is cool looking!
  • Options
    TNBigfoot68TNBigfoot68 Posts: 2,742 ✭✭✭✭✭
    That is cool!
    I was born a fool, and just got bigger!
Sign In or Register to comment.