@Yakster said:
Trying out a Luciano The Dreamer after a long, failed struggle trying to replace a shower valve. It has a nice oily wrapper and the first third is hitting me like cedar and motor oil. Looks like I'll have to cut the handle of the shower off the valve stem to replace the cartridge.
LFD on deck.
Mixing valve?
Yeah, can't get the handle off, I'm going to have to cut off the handle because the set screw won't budge. Tried head, cold spray, everything.
Join us on Zoom vHerf (Meeting # 2619860114 Password vHerf2020 )
@Yakster said:
I did try hitting the end of the hex wrench to try and free it, no joy. I've ordered a replacement set.
Try some coke or even lime/lemmon juice to dissolve the crud, heat it up with a single flame torch, tap it and then press in hard with the head ofvthe screw driver, you can put a rubber band over the driver head if the screw head is a bit stripped and not a tight fit.
That's funny because it's what I said to your mom last night bro.
😘
Disclaimer: All trolling is provided for the sole entertainment purposes of the author only. Readers may find entertainment and hard core truths, but none are intended. Any resulting damaged feelings or arse chapping of the reader are the sole responsibility of the reader, to include, but not limited to: crying, anger, revenge pørn, and abandonment or deletion of ccom accounts. Offer void in Utah because Utah is terrible.
@Yakster said:
I did try hitting the end of the hex wrench to try and free it, no joy. I've ordered a replacement set.
Try some coke or even lime/lemmon juice to dissolve the crud, heat it up with a single flame torch, tap it and then press in hard with the head ofvthe screw driver, you can put a rubber band over the driver head if the screw head is a bit stripped and not a tight fit.
Will try, but vinegar and WD40 didn't help.
Join us on Zoom vHerf (Meeting # 2619860114 Password vHerf2020 )
Disclaimer: All trolling is provided for the sole entertainment purposes of the author only. Readers may find entertainment and hard core truths, but none are intended. Any resulting damaged feelings or arse chapping of the reader are the sole responsibility of the reader, to include, but not limited to: crying, anger, revenge pørn, and abandonment or deletion of ccom accounts. Offer void in Utah because Utah is terrible.
@Yakster said:
I did try hitting the end of the hex wrench to try and free it, no joy. I've ordered a replacement set.
Try some coke or even lime/lemmon juice to dissolve the crud, heat it up with a single flame torch, tap it and then press in hard with the head ofvthe screw driver, you can put a rubber band over the driver head if the screw head is a bit stripped and not a tight fit.
Bro.... I get the lemon/lime but coke is expensive right now. Why.... you know someone???
Disclaimer: All trolling is provided for the sole entertainment purposes of the author only. Readers may find entertainment and hard core truths, but none are intended. Any resulting damaged feelings or arse chapping of the reader are the sole responsibility of the reader, to include, but not limited to: crying, anger, revenge pørn, and abandonment or deletion of ccom accounts. Offer void in Utah because Utah is terrible.
Disclaimer: All trolling is provided for the sole entertainment purposes of the author only. Readers may find entertainment and hard core truths, but none are intended. Any resulting damaged feelings or arse chapping of the reader are the sole responsibility of the reader, to include, but not limited to: crying, anger, revenge pørn, and abandonment or deletion of ccom accounts. Offer void in Utah because Utah is terrible.
Comments
Yeah, can't get the handle off, I'm going to have to cut off the handle because the set screw won't budge. Tried head, cold spray, everything.
If you couldn't get it off with head, it ain't coming off.
Trapped in the People's Communist Republic of Massachusetts.
Maybe too late, but hitting a nail set on the corroded set screw a bunch of times will often free it. Chromed pot metal fixtures suck.
I did try hitting the end of the hex wrench to try and free it, no joy. I've ordered a replacement set.
Try some coke or even lime/lemmon juice to dissolve the crud, heat it up with a single flame torch, tap it and then press in hard with the head ofvthe screw driver, you can put a rubber band over the driver head if the screw head is a bit stripped and not a tight fit.
That's funny because it's what I said to your mom last night bro.
😘
Will try, but vinegar and WD40 didn't help.
Sell the house bro. Just sell the house.
Burn it
Bro.... I get the lemon/lime but coke is expensive right now. Why.... you know someone???
Hope you guys had a great weekend! Cheers.
Yellow cello goodness from @VegasFrank
This long, lean, gorgeous beauty courtesy of @peter4jc. Thank you sir!
Wow, these are great! Don't know if one box will do.
Toro
Last Call corona
This Pichardo Classico Sumatra is fantastic!
Night cap. Doesn't suck.
Man O' War Puro Authentico Corona from @Trykflyr_1 Thanks Paul!
My favorite cigar list here
Thanks @NorCalR1!
This cigar is so packed, it feels like it has lead in it. Beefy arse stick, no light fill on these.
Oliva Melanio V for Melanio Monday. RIP Olivia Newton John.