LFD Air bender

kuzi16 · February 2010

in short, get one.

this is the new release from LFD. its a medium bodied cigar with an Ecuadorian Habano wrapper, dominican filler and binder.
flavors include:
cinnamon, anise, cedar, leather.

i feel that since its so new a bit of rest/age would do it some good there were a few burn issues.

stephen_hannibal · February 2010

Ummm Kuzi where's the full review?

bbc020 · February 2010

make sure the shop up there has some left for the end of the month!

madurofan · February 2010

I understand this is a much milder cigar than a typical LFD. This true Kuz?

dennisking · February 2010

what's the vitola. the litto gomez diez chisel i smoked had the worst draw ever. i don't know if its a chisel thing or what but i would like to enjoy my sticks, not be pissed. i like the lfd stuff

madurofan · February 2010

Chisels are a different animal. How did you open the head up on your chisel?

j0z3r · February 2010

I already wanted to try the Airbender and have wanted to see what people thought of it first, guess the next step is to get a couple.

dennisking · February 2010

madurofan:
Chisels are a different animal. How did you open the head up on your chisel?

after clipping with a cuban crafters cutter about 5 times i rolled the end round and it opened a little. still not enough though

madurofan · February 2010

dennisking:
madurofan:
Chisels are a different animal. How did you open the head up on your chisel?
after clipping with a cuban crafters cutter about 5 times i rolled the end round and it opened a little. still not enough though

There's the problem. The chisel is supposed to be punched. You hold the chisel so the straight edge of the head is facing you and parallel to the floor. Then punch a hole in the top of the chisel as close to the head as you can. Sounds weird but it works well.

dennisking · February 2010

Well how about that, ya learn something new every day. Thanks maddy. you would've thought it would've loosened up after unflattening the chisel though. either way, it was a let down, the lfd dl660 was better imo.

madurofan · February 2010

Give it another shot.

dennisking · February 2010

I guess I will have to. everyone loves the LG Diez as much as his LFD stuff so it should be good. thanks for the tip

madurofan · February 2010

I do want to know why the hell its called an air bender.

shamrocked · February 2010

madurofan:
I do want to know why the hell its called an air bender.

For ninjas...

phobicsquirrel · February 2010

madurofan:
dennisking:
madurofan:
Chisels are a different animal. How did you open the head up on your chisel?
after clipping with a cuban crafters cutter about 5 times i rolled the end round and it opened a little. still not enough though
There's the problem. The chisel is supposed to be punched. You hold the chisel so the straight edge of the head is facing you and parallel to the floor. Then punch a hole in the top of the chisel as close to the head as you can. Sounds weird but it works well.

lol, you guys can just pinch it and it will open up just fine.

madurofan · February 2010

shamrocked:
madurofan:
I do want to know why the hell its called an air bender.

For ninjas...

Damn it, again? They keep leaving my humidor open and empty.

madurofan · February 2010

phobicsquirrel:
you guys can just pinch it and it will open up just fine.

You know how I know the squirrel is gay ....

dennisking · February 2010

phobicsquirrel:
madurofan:
dennisking:
madurofan:
Chisels are a different animal. How did you open the head up on your chisel?
after clipping with a cuban crafters cutter about 5 times i rolled the end round and it opened a little. still not enough though
There's the problem. The chisel is supposed to be punched. You hold the chisel so the straight edge of the head is facing you and parallel to the floor. Then punch a hole in the top of the chisel as close to the head as you can. Sounds weird but it works well.
lol, you guys can just pinch it and it will open up just fine.

i pinched and rolled the end until it went round and still the draw sucked. must've needed some serious rest time

nightmaremike31 · February 2010

dennisking:
phobicsquirrel:
madurofan:
dennisking:
madurofan:
Chisels are a different animal. How did you open the head up on your chisel?
after clipping with a cuban crafters cutter about 5 times i rolled the end round and it opened a little. still not enough though
There's the problem. The chisel is supposed to be punched. You hold the chisel so the straight edge of the head is facing you and parallel to the floor. Then punch a hole in the top of the chisel as close to the head as you can. Sounds weird but it works well.
lol, you guys can just pinch it and it will open up just fine.
i pinched and rolled the end until it went round and still the draw sucked. must've needed some serious rest time

Dude, the pinch n roll works great for me. It's like the only way to really get that itch.

... wait, are we talkin cigars???

kuzi16 · February 2010

bbc020:
make sure the shop up there has some left for the end of the month!

...too late. i think they are already sold out.

kuzi16 · February 2010

madurofan:
I understand this is a much milder cigar than a typical LFD. This true Kuz?

yes. its the most mild LFD i have had. medium in body. very full in flavor.

kuzi16 · February 2010

dennisking:
what's the vitola. the litto gomez diez chisel i smoked had the worst draw ever. i don't know if its a chisel thing or what but i would like to enjoy my sticks, not be pissed. i like the lfd stuff

i had the robusto. i saw a toro and one other one but i cant remember exactly

bbc020 · February 2010

kuzi16:
bbc020:
make sure the shop up there has some left for the end of the month!
...too late. i think they are already sold out.

bummer

kuzi16 · February 2010

bbc020:
kuzi16:
bbc020:
make sure the shop up there has some left for the end of the month!
...too late. i think they are already sold out.
bummer

got more in

TatuajeVI · February 2010

Heh, you think they'll be there next weekend? Cause I want a few!

I haven't found them locally. What's the price point on these?

kuzi16 · February 2010

uh... 7-10 ish

i hope they have em. i hope to have one.

phobicsquirrel · February 2010

madurofan:
phobicsquirrel:
you guys can just pinch it and it will open up just fine.
You know how I know the squirrel is gay ....

.....how

phobicsquirrel · February 2010

I hear that these are getting a new wrapper. The same used on the air bender. I'm wondering when this will happen.

kuzi16 · February 2010

The Chisel and DL 700 are getting new wrappers, the same wrapper that's on the Air Bender

phobicsquirrel · February 2010

I know you liked the air bender, but do you think it will make the chisel better (if you've had a chisel)? And do you know if it's the chisel maduro getting a new wrapper or just the chisel?

kuzi16 · February 2010

i dont know if it will make the chisel better. the filler is different on the airbender as well. i like the chisel, but i like the chisel maduro better so its been a while since ive had one. tough call there.

LFD Air bender

Comments